Pre-Hung 3-Lite 1-Panel Curved Bars Arch Top Mahogany TDL Double Doors with Insulated Beveled Glass

Brand: Prestige Entries

Product ID: 9457321247001

Model: 7131CAP

Pre-Hung 3-Lite 1-Panel Curved Bars Arch Top Mahogany TDL Double Doors with Insulated Beveled Glass
Pre-Hung 3-Lite 1-Panel Curved Bars Arch Top Mahogany TDL Double Doors with Insulated Beveled Glass

*DISCLAIMER: The above image does not reflect finish and/or glass selections

Pre-Hung 3-Lite 1-Panel Curved Bars Arch Top Mahogany TDL Double Doors with Insulated Beveled Glass

Brand: Prestige Entries

Product ID: 9457321247001

Model: 7131CAP

  • 1

    Door Information

    Door Size (W x H)

    Pre-Hanging Make your selection

    Door Only (Slab)

    Door slabs require prep/mortising for hinges, drilling for handle/lockset, trimming for reveals, and door sweep, on location, before the door slab will be ready to be installed into the existing frame.

    If you're replacing a single door and the existing door frame is in good condition, there's typically no need to replace the frame, just the door slab can be replaced.

    For double door slab replacements, which can be done, you will need the same type of prep work noted above, plus some additional components for install to an existing frame. We recommend, for ease and accuracy, to replace the existing double door with a new pre-hung double door unit.

    Pre-Hung Door

    Pre-hanging doors come pre-assembled for ease and accurate installation of your new door unit. 

    Your pre-hung door will come pre-assembled with the following items:

    Exterior pre-hanging door components include: door slab, door frame (made up of jamb legs, jamb header and threshold/sill), hinges (3 hinges for 6’8” door and 4 hinges for 8’ tall door) Kerf weatherstripping, and door sweep.

    Interior pre-hanging door components include: door slab, frame, and hinges

    If this is what you need, please select "Yes" from the pre-hanging options.

  • 2

    Frame Information

    Door Jamb Make your selection

    What jamb size do I need?

    When you're ordering a pre-hung door, one of the key things to double-check is the door jamb size. If you are installing the door in a wall with standard 2x4 studs, common sizes are 4-5/8" or 4-9/16". If your wall has 2x6 framing, you will want to go with a larger jamb, like 6-5/8" or 6-9/16".

    If you are replacing an existing door and already have a jamb in place, take a look at the diagram below. It shows what part of the door unit to measure. If your measurement does not match the standard sizes mentioned above, or if you are not sure about it your measurement, it’s a good idea to check with your installer to avoid any issues.

    Need a custom jamb size? No problem! Just give us a call, and one of our team members will be happy to help you out.

    IMPORTANT

    When you order a pre-hung door, it’s considered non-returnable and non-refundable, so make sure everything’s just right before you finalize your order. Let us know if you have any questions — we are here to help!"

    Exterior Brickmould Make your selection

    Exterior Door Trim

    Exterior door trim refers to the decorative and functional elements installed around the outer frame of an exterior door. This trim serves multiple purposes, including enhancing the aesthetic appeal of the doorway, providing weather protection, and helping to seal gaps between the door and the wall. Exterior door trim can be made from various materials, such as wood, vinyl, metal, or composite materials.

    Interior Casing Make your selection

    Interior Door Trim

    Interior door trim is the decorative molding and framing applied to the interior sides of a door frame or doorway. Its primary function is to enhance the aesthetics of a room and to provide a smooth transition between the door and the adjacent wall. Interior door trim can come in a variety of styles and materials, including wood, MDF (medium-density fiberboard), vinyl, or composite materials. Interior door trim is primarily decorative and helps create a cohesive and finished look within interior spaces.

    Handing Make your selection

  • 3

    Door Hardware

    Hinges Make your selection

    Hardware Color Explanation

    Black/Bronze

    Black/bronze is a versatile color option that combines the deep, rich tones of black with the warm, earthy hues of a dark bronze. It often appears as a dark, matte finish that can add a sense of sophistication and elegance to various design elements. Black/bronze finishes are commonly used in interior and exterior hardware, such as door handles, hinges, and door sills.

    Note: The bronze color used is often mistaken for black and will work well with black or bronze handle and lock sets.

    Satin Nickel:

    Satin nickel is a popular metallic finish known for its smooth, muted sheen and silver-gray appearance. It is achieved by applying a nickel plating with a brushed or satin finish, resulting in a soft, matte surface. Satin nickel is a versatile choice for a wide range of applications, including door hardware, hinges and sills. Its subtle luster gives it a modern and timeless aesthetic that can complement both contemporary and traditional design styles.

    Sill Make your selection

    Hardware Color Explanation

    Black/Bronze

    Black/bronze is a versatile color option that combines the deep, rich tones of black with the warm, earthy hues of a dark bronze. It often appears as a dark, matte finish that can add a sense of sophistication and elegance to various design elements. Black/bronze finishes are commonly used in interior and exterior hardware, such as door handles, hinges, and door sills.

    Note: The bronze color used is often mistaken for black and will work well with black or bronze handle and lock sets.

    Satin Nickel:

    Satin nickel is a popular metallic finish known for its smooth, muted sheen and silver-gray appearance. It is achieved by applying a nickel plating with a brushed or satin finish, resulting in a soft, matte surface. Satin nickel is a versatile choice for a wide range of applications, including door hardware, hinges and sills. Its subtle luster gives it a modern and timeless aesthetic that can complement both contemporary and traditional design styles.

    Handle Preparation Make your selection

    How should I have the door prepared for a handle and/or a lock set?

    Preparation for Handle and Deadbolt

    This is the most commonly recommended method and is considered a universal preparation that should be compatible with most standard handle and deadbolt sets available on the market. The door will be drilled with a standard 2-3/8" backset and a 2-1/8" diameter hole. The handle and deadbolt holes will be spaced 5-1/2" center to center, designed to accommodate all-in-one units.

    Handle and Deadbolt with Factory Hardware

    Your door will be prepared for a handle and a deadbolt, and you have the option to choose from factory hardware selections that can come pre-prepared and, in many cases, pre-installed.

    No Handle Preparation

    Your door will not be prepared for any hardware, allowing you the flexibility to have it prepared on-site to match the handle and/or lock set style of your choice.

    Handle Only

    The door will be drilled with a standard 2-3/8" backset and a 2-1/8" diameter hole specifically for a handle.

    Deadbolt Only

    The door will be drilled with a standard 2-3/8" backset and a 2-1/8" diameter hole specifically for a deadbolt.

    Multipoint

    *** IMPORTANT *** Before selecting this option, please be aware that procuring your own handleset for this style of preparation can be challenging due to the variety of multipoint locking systems and brands available. We highly recommend speaking with one of our professionals before choosing this option. If you desire the multipoint locking option, we suggest selecting "Multipoint with Factory Hardware."

    Multipoint with Factory Hardware

    This option provides you with a multipoint locking system, including a handleset from the manufacturer that is guaranteed to work seamlessly with your multipoint locking system.

    Multipoint Handle Options Make your selection

    Tubular Entry Set Make your selection

$2,525.00

We Require a Minimum Of Six (6) Interior Doors Per Shipment

Need help with your order?

Speak with a doors.com specialist.

(877) 929-3667

Mon - Fri | 8AM - 6PM CST

1 Item Added to Cart ()
View Cart & Checkout

Product Description

Product Description

  • 3 lite 1 panel curved bar arch top Mahogany TDL double entry doors with insulated, beveled glass
  • Engineered stiles and rails to aid in prevention of warping and cracking
  • Full 1-3/4" thickness stiles and rails
  • Stile widths are 4-7/8"
  • Doweled construction joins stiles and rails
  • Crossbanded veneers to promote stability
  • Full 1-1/8" thickness 3-ply split resistant panels
  • Solid wood single hip raised panels with split resistant core
  • Mahogany is a reddish-brown hardwood with rich golden to deep red-brown color variations
  • True divided lite (TDL) with insulated, beveled glass
  • 1-1/4" beveled glass (11/16" visible)
  • Door is sold unfinished
  • 1 year limited manufacturer warranty
SPECS:
Door Type: Exterior
Door Style: TDL
Wood Species: Mahogany
Construction: Engineered Stile and Rail
Door Thickness: 1-3/4"
Glass Type: Tempered, Dual Pane
Glass Thickness: 1-1/4"
Finished: No, sold unfinished
Warranty: 1 Year Limited Manufacturer Warranty

Specs & Measurements

Specs & Measurements

Door Type: Exterior Door

Material: Wood, Mahogany

Style: Arched and Round Top, French, Divided Lite, Modern Farmhouse

Click a link below to view detailed dimensions:

Manufacturer Information Links:

Shipping & Lead Times

Shipping & Lead Times

All doors and door units are shipped via LTL ( Less than truckload ). We ship manufacturer direct to your preferred location. Once your order has shipped we will provide you with the carrier name and contact. They will contact you to schedule a day and time for delivery. For detailed information regarding our shipping and shipping policies, please click here.

Lead Times:

We make every effort to provide the best estimated lead times for each vendor by analyzing the latest available data and visible trends.

Manufacturer Name: Prestige Entries

Unfinished Door Slab 1-2 Weeks

Finished Door Slab 3-4 Weeks

Unfinished Prehung Unit 3-4 Weeks

Finished Prehung Unit 4-5 Weeks

Warranty Information

Warranty Information

At doors.com, we hold the privilege of being an Authorized Dealer for the esteemed brands we carry. When you choose to purchase from an authorized dealer, you are making a decision rooted in trustworthiness and reliability. Our direct sourcing from manufacturers ensures that you receive factory-fresh products backed by comprehensive warranties.


We strongly encourage you to thoroughly review the manufacturer's warranty, ensuring compliance with all stipulations and guidelines. Your satisfaction and confidence in your purchase are of paramount importance to us.


Prestige Entries offers a limited warranty for (1) years.


Access and download the warranty provided by the manufacturer for this product here.

Prestige Barn Door Warranty Prestige Fiberglass Warranty Prestige Steel Door Warranty Prestige Wood Door Warranty

Recently Viewed...