Door Size (W x H)

36"x80"

Glass Options Make your selection

Clear Beveled Low-E

Pre-Hanging Make your selection

No

Yes (+$600)

Brickmould Make your selection

Details

Exterior Door Trim

Exterior door trim refers to the decorative and functional elements installed around the outer frame of an exterior door. This trim serves multiple purposes, including enhancing the aesthetic appeal of the doorway, providing weather protection, and helping to seal gaps between the door and the wall. Exterior door trim can be made from various materials, such as wood, vinyl, metal, or composite materials.

No Brickmould

2" Standard Mahogany Brickmould (+$100)

Door Jamb Make your selection

Details

What jamb size do I need?

When placing an order for a prehung door, it's important to ensure that you select the correct door jamb size. In most instances, when the wall where you intend to install the door consists of 2x4 wall studs, a 4-inch jamb is typically required. Suitable jamb sizes for 2x4 walls include 4-1/2", 4-5/8", 4-9/16", and 4-3/4". If your door unit is intended for a wall with 2x6 framing, you should expect the jamb size to be 6-1/2", 6-5/8", or 6-9/16", all of which are acceptable sizes.

If you have an existing door jamb you are replacing, a diagram provided below illustrates which part to measure. If your measurement falls outside the specified numbers above or if you are uncertain about your measurement, we strongly recommend consulting with your installer.

For custom jamb sizes, please contact us, and one of our associates will be glad to assist you.

IMPORTANT

Please be aware that by selecting a prehung unit, you are agreeing to the item being considered non-returnable and non-refundable.

4-5/8" Mahogany Jambs 6-5/8" Mahogany Jambs (+$200)

Handing Make your selection

Left Hand Inswing

Left Hand Outswing

Right Hand Inswing

Right Hand Outswing

Hinges Make your selection

Bronze

Satin Nickel

Sill Make your selection

Details

Hardware Color Explanation

Black/Bronze

Black/bronze is a versatile color option that combines the deep, rich tones of black with the warm, earthy hues of a dark bronze. It often appears as a dark, matte finish that can add a sense of sophistication and elegance to various design elements. Black/bronze finishes are commonly used in interior and exterior hardware, such as door handles, hinges, and door sills.

Note: The bronze color used is often mistaken for black and will work well with black or bronze handle and lock sets.

Satin Nickel:

Satin nickel is a popular metallic finish known for its smooth, muted sheen and silver-gray appearance. It is achieved by applying a nickel plating with a brushed or satin finish, resulting in a soft, matte surface. Satin nickel is a versatile choice for a wide range of applications, including door hardware, hinges and sills. Its subtle luster gives it a modern and timeless aesthetic that can complement both contemporary and traditional design styles.

Black/Bronze

Mill Aluminum

Handle Preparation Make your selection

Details

How should I have the door prepared for a handle and/or a lock set?

Preparation for Handle and Deadbolt

This is the most commonly recommended method and is considered a universal preparation that should be compatible with most standard handle and deadbolt sets available on the market. The door will be drilled with a standard 2-3/8" backset and a 2-1/8" diameter hole. The handle and deadbolt holes will be spaced 5-1/2" center to center, designed to accommodate all-in-one units.

Handle and Deadbolt with Factory Hardware

Your door will be prepared for a handle and a deadbolt, and you have the option to choose from factory hardware selections that can come pre-prepared and, in many cases, pre-installed.

No Handle Preparation

Your door will not be prepared for any hardware, allowing you the flexibility to have it prepared on-site to match the handle and/or lock set style of your choice.

Handle Only

The door will be drilled with a standard 2-3/8" backset and a 2-1/8" diameter hole specifically for a handle.

Deadbolt Only

The door will be drilled with a standard 2-3/8" backset and a 2-1/8" diameter hole specifically for a deadbolt.

Multipoint

*** IMPORTANT *** Before selecting this option, please be aware that procuring your own handleset for this style of preparation can be challenging due to the variety of multipoint locking systems and brands available. We highly recommend speaking with one of our professionals before choosing this option. If you desire the multipoint locking option, we suggest selecting "Multipoint with Factory Hardware."

Multipoint with Factory Hardware

This option provides you with a multipoint locking system, including a handleset from the manufacturer that is guaranteed to work seamlessly with your multipoint locking system.

No Handle Preparation (+$0) Prep for Handle and Deadbolt, 2-3/8" Backset (+$0) Prep for Handle Only, 2-3/8" Backset (+$0) Prep for Deadbolt Only, 2-3/8" Backset (+$0)